
If you're shipping somewhere between 6 and 18 pallets, you're in the awkward middle of freight. It's too much for a normal LTL quote to stay accurate and too little to fill a 53-foot trailer. Most shippers in this spot pay more than they need to because they only ask for one kind of quote.
Short answer: under about 6 pallets and 5,000 pounds, standard LTL is usually right. From roughly 6 to 18 pallets, get a volume LTL quote and a partial truckload quote side by side, because a standard LTL tariff rate stops being reliable at that size. Past about 18 to 20 pallets, or once you're using most of the trailer, price a full truckload too. It's often closer than people expect.
The rest of this guide explains where those lines come from, what each option is actually charging you for, and how we decide between them for a given load.
The three ways to ship a mid-size load
Standard LTL
Less-than-truckload carriers like Estes, Saia, Old Dominion and XPO move your pallets through their terminal networks alongside freight from dozens of other shippers. Your freight gets picked up, taken to a terminal, sorted, loaded onto a linehaul trailer, then sorted again at the destination terminal before final delivery.
You pay by weight, freight class and distance, plus accessorial fees for things like liftgates or residential delivery. That pricing works well for a few pallets. It breaks down when your shipment starts taking up a big share of the trailer, because the tariff assumes your freight is small relative to everything else on the truck.
Volume LTL
Volume LTL is still an LTL carrier moving your freight through its network, but it's priced as a spot quote instead of from the standard tariff. The carrier looks at how much trailer space you'll use and what it has available on that lane that week.
Carriers draw the line in different places. Estes, for example, treats a shipment as a volume load once it weighs at least 5,000 pounds or takes up at least 8 linear feet of trailer, and says its volume quotes are good for 30 days if the freight doesn't change.
Partial truckload
A partial truckload rides on a truckload carrier's trailer with one or two other shippers' freight. The big difference from LTL is handling: the freight usually stays on the same trailer from pickup to delivery, with no terminal transfers. That means fewer touches, less chance of damage and, on many lanes, faster transit.
Partials are priced more like truckload: by the space you take, the miles, and what the truckload market is doing that week. Freight class matters much less.
Full truckload
You get the whole trailer. One pickup, one delivery, nobody else's freight. You pay for the truck whether you fill it or not, so the per-pallet cost drops the more you load. See our full truckload service for how we book these.
Where an LTL quote stops being valid
This is the part most shippers miss. Online LTL quote tools and standard tariff rates have limits printed right on them, and if your shipment goes past them, the number you got isn't the number you'll pay.
Saia's LTL quote page, for example, says that if a shipment takes more than 10 standard pallet spaces or more than 16 feet of the trailer, you need to get a spot quote instead. It also asks for a spot quote on light, bulky freight: shipments of 350 to 749 cubic feet at 4 pounds per cubic foot or less, and over 749 cubic feet at 6 pounds per cubic foot or less.
Why does this matter? If you book a 12-pallet shipment off a standard LTL quote, the carrier can rerate it at the terminal under its cubic capacity or linear foot rules. That's how a quote turns into a much bigger invoice. We cover how that happens in why an LTL invoice runs higher than the quote.
Quick linear feet math
Carriers often measure big shipments by how many feet of trailer they use, not by pallet count. For standard 48 x 40 inch pallets loaded two across:
| Pallets (2 across, loaded straight) | Rows | Linear feet used |
|---|---|---|
| 6 | 3 | about 12 ft |
| 8 | 4 | about 16 ft |
| 10 | 5 | about 20 ft |
| 14 | 7 | about 28 ft |
| 18 | 9 | about 36 ft |
| 26 | 13 | about 52 ft (a full 53 ft dry van) |
Each row of two pallets loaded straight takes 48 inches, so the math is simple: number of rows times 4 feet. Pallets that can't be stacked, or that are turned, change this. Our guide to how many pallets fit on a 53-foot trailer walks through the loading patterns, and our standard pallet size guide covers the sizes that don't fit the 48 x 40 rule.
Notice that 8 pallets already hits Saia's 16-foot spot quote line and Estes's 8 linear feet volume line. By the time you're at 6 pallets of anything heavy, you're close to Estes's 5,000 pound volume threshold too.
What you're really paying for with each option
The comparison isn't only about price. Here's how the options differ in practice:
| Standard LTL | Volume LTL | Partial truckload | Full truckload | |
|---|---|---|---|---|
| Typical size | 1 to 6 pallets | About 6 to 12+ pallets (carrier rules vary) | About 6 to 18 pallets | 18 to 26+ pallets, or heavy |
| Priced by | Class, weight, distance (tariff) | Spot quote on space and lane | Space, miles, truckload market | Whole truck, miles, market |
| Terminal handling | Yes, several transfers | Yes | Usually none | None |
| Freight class needed | Yes | Often still asked | Rarely matters | No |
| Transit | Network schedule | Network schedule | Often faster than LTL, but depends on co-loads | Fastest, direct |
| Damage risk | Highest (most handling) | High | Lower | Lowest |
Sources for the size lines: Estes and Saia carrier rules above. Other carriers use different cutoffs, and brokers describe the ranges differently, so treat these as rough bands, not rules.
How the truckload market moves your partial price
Because partials and full trucks are priced off the truckload market, what's happening on the spot market feeds straight into your quote. Right now that market is firm. DAT reported the national dry van spot rate at $3.11 a mile including fuel for the week of November 7 to 13, 2026, with van linehaul rates 36% higher than a year earlier (DAT via The Trucker, Nov 16, 2026).
When truck rates are high like this, a full truck for 14 pallets gets expensive, and partials and volume LTL look better. When truck rates drop, the full truck can come in at or under a volume LTL quote for the same freight. That's why the answer changes month to month, and why we don't give shippers a fixed rule.
LTL tariffs move more slowly. Most LTL carriers raise their base rates once a year through a general rate increase, which we track in our freight rate increases guide.
Which option for 6, 10, 14 and 18 pallets
Here's how we think through it, with standard 48 x 40 pallets of dry freight in mind.
6 pallets. Often still standard LTL, especially if the total weight is under 5,000 pounds and the pallets stack. If they're heavy or can't be stacked, ask for a volume quote as well. Check the LTL carriers that serve both ends of your lane.
8 to 10 pallets. This is where standard LTL quotes stop being trustworthy. You're at or past most carriers' linear foot limits. Get a volume LTL quote and a partial truckload quote. If the freight is fragile or high value, lean toward the partial, since it skips terminal transfers.
12 to 14 pallets. Get all three: volume LTL, partial and full truckload. On a long lane in a soft truck market, the full truck can be competitive. In a tight market like this fall, partials usually win on cost.
16 to 18 pallets. You're using roughly two-thirds of a 53-foot van. A full truck often makes sense here, especially if you value a direct delivery and a fixed appointment. Partials are still worth quoting on long lanes.
When a partial truckload is a bad fit
Partials aren't always the answer. They tend to work poorly when:
The lane is short. On a run of a couple hundred miles, the cost of coordinating a co-load can wipe out the savings, and a full truck or standard LTL may come out ahead.
Freight is floor-loaded. Partials usually need palletized freight so it can be loaded and unloaded around other shippers' goods.
You need a tight delivery appointment. If your freight shares the truck with another stop, delivery timing depends on that other shipment too.
The freight can't be touched or stacked by anyone else. Some loads need a dedicated trailer, full stop.
How to get the right quote the first time
Whoever you call, give them the same details so you can compare apples to apples:
Exact pallet count and size. Note any that aren't 48 x 40.
Total weight and each pallet's height.
Whether the pallets can be stacked. This changes the linear feet more than anything else.
Pickup and delivery details: dock or no dock, liftgate, appointment needed, residential or business.
Ready date and how flexible it is. A day or two of flexibility gives partial carriers time to build a co-load.
What's in the shipment and whether it's fragile. This matters for freight class on LTL. Our freight class guide explains how density sets it.
Then ask for volume LTL, partial and full truckload rates on the same day. Rates move week to week, so quotes from different days aren't a fair comparison. If you book volume LTL, make sure the carrier's volume quote number goes on the bill of lading. Without it, the shipment can get billed at the standard tariff.
For a quick price on smaller shipments, our instant LTL quote tool works out freight class for you. For 6 pallets and up, ask us for a quote and we'll price the options side by side. If you're still deciding between the two big categories, our FTL vs LTL comparison goes deeper on that choice.
FAQ
How many pallets is a partial truckload?
There's no single industry rule. Most brokers and carriers describe partials as roughly 6 to 18 standard pallets, or a shipment that uses a meaningful share of the trailer without filling it. Ask your carrier or broker which range they quote.
Is volume LTL the same as partial truckload?
No. Volume LTL is still moved by an LTL carrier through its terminal network, just priced by spot quote. A partial truckload rides on a truckload carrier's trailer, usually without terminal transfers.
Do I need a freight class for a partial truckload?
Usually not. Partials are priced on space, weight and miles. You'll still need an accurate description of the freight and its weight for the bill of lading.
Why did my LTL invoice go up when I shipped 10 pallets?
Most likely the carrier rerated it under its linear foot or cubic capacity rules, because the shipment was larger than its standard tariff allows. Getting a volume quote before you ship prevents this.
How long is a volume LTL quote good for?
It depends on the carrier. Estes, for example, says its volume LTL and truckload quotes are good for 30 days as long as the freight details stay the same.
Cover photo: Tiger Lily on Pexels.



